In my opinion, the MiterSet tool is the easiest to use, most accurate way to set up miter angles for cutting segments on the table saw. No more hours spent in calibration. No more fixing "gaposis". Click here to visit miterset.com and learn all about it. Now Rockler has a competing product and I'm using it as well. It'll be interesting to compare them,
Segmented Turning by WDK

Segmented Turning

Design your first segmented project in 5 minutes with the Segmented Project Planner

Download Installer / Free 30 day Trial
Current Version: 4.00.0030 (3/6/2024)

Products Classes Free Plans Hints Buy Now Gallery Wood Costs User Projects FAQ
Major Features of the Segmented Project Planner
Calculators( AutoBowl, Incline Angle, Volume)
Color Picker
Designers ( Diamonds, Segmented Scene, Vertical Spacers, Blocks,
ZigZags, Diamond Borders, Slicer Open Segment)
Design Tools (Describe-A-Shape, Design Assistant, Layer Tuner, Shape-A-Bowl, Sketch-A-Bowl)
 Document Generator
Named Colors
Project Resizer
Reports (Project, Cut List, Turned Away, Turning)
RingMaster Support		 Segment Designs/Mosaics
Segment Images
Segment Painting
Template Printers (Rings, Segments, Angles)
Videos ( Program Usage, Construction)

Designing segmented turnings is a lot easier using AutoBowl.

With this function, just the outer dimensions of the desired object are required. I'll show you how simple by way of this simple globular bowl.

Easier Segmented Bowl Design

Now here are the steps:

  • Draw the outer walls of the bowl.
  • Draw the inner walls if you need them; they're not required. You do need, however, to decide how thick the walls should be; .5" in our case.
  • Draw horizontal lines to mark the layer boundaries, in this case .75" spacing.
  • Measure off the diameter of the bowl at each layer boundary, including the bottom, 3, 4.33, 4.9, etc.
  • Transfer these measurements into the Segmented Project Planner.
  • Exercise the AutoBowl function with the wall thickness set to .5.
Click here to get back to the Segmented Project Planner base page.

Still not convinced? Just give me a call. I'll answer all your questions.


What's Up Resource Index&Links Classes Free Plans Hints FAQ SiteMap Downloads

Contact US: 4614 SULLIVAN way || Santa Rosa, CA 95409 || Phone: (805) 202-9537 || Email: bkandler@segmentedturning.com

Page Last Updated: 4/22/2024

Find us on Facebook